This BKSILICONE workshop video follows Taiwan mahjong silicone mold making from an SLA master to the finished silicone mold. The six stages below match the process shown.
Step 1 — SLA 3D-Printed Master
The video begins with an SLA 3D-printed master for a Taiwan mahjong silicone mold. The stated 0.04 mm (<0.1 in) is the printing layer height, not a dimensional accuracy or tolerance claim.
Step 2 — Weighing the Silicone
The silicone is weighed before mixing. Use the mixing ratio specified for your silicone system; this video does not establish a universal mixing ratio.
Step 3 — Mixing Thoroughly
The silicone is mixed thoroughly before it is transferred into cups. Follow the material instructions for mixing and working time.
Step 4 — Vacuum Degassing
The prepared silicone is vacuum degassed before pouring. Degassing is part of the workshop sequence shown in this project.
Step 5 — Pouring the Silicone
The silicone is poured into the master mold. The video shows the fill stage after mixing and vacuum degassing.
Step 6 — Curing and Compressed-Air-Assisted Demolding
The video records fully cured silicone after four hours in this project, followed by compressed-air-assisted demolding. Actual curing time depends on the silicone and processing conditions; follow the applicable material instructions.
About this workshop process
This is a mold-making process demonstration, not a ready-stock product offer. Taiwan mahjong describes the project topic and does not identify a customer or customer location.
Explore custom silicone mold manufacturing, platinum-cure silicone and our quality and compliance information.
For a custom project, see our master pattern preparation. For other casting applications, browse silicone molds for resin casting, including the 1658 rectangular daisy mold.
